Buy EPS, PIR, Phenolic and XPS thermal laminates
Manufactured by Celotex, Kingspan and Warmline.
Thermal laminates provide a 2-in-1 solution for direct fixing in various applications within the building envelope.
Available as plasterboard, ply and building board backed insulation for dry-lining, flat roof and soffit build-ups.
Insulated plasterboard, plywood and building boards
Use the following dropdowns to filter the products:
Celotex PL4000 'Plasterboard Laminate', a rigid PIR foam insulation board with a 12.5mm tapered edge plasterboard on the front face and a composite aluminium foil/kraft paper on the back face, is suitable for the following applications: dot and dab or mechanically fixed dry lining direct to masonry and timber or steel frame walls and the underside of rafters or joists.
Available in thicknesses from 37.5mm - 77.5mm.
Has a Thermal Conductivity of 0.022 W/mK (0.19 W/mK for the plasterboard) and a compressive strength of 120kPa.
View our Celotex PL4000 page for further details and prices on the product
Kingspan Kooltherm K110 Plus, a rigid Phenolic foam insulation board with a 6mm A1 Euroclass building board on the outer facing and a glass tissue on the inner face, is suitable for use in semi-exposed concrete floor decks in new and existing car parks, storage areas, loading bays and similar areas beneath habitable domestic buildings.
Available in thicknesses from 71mm - 126mm.
Has a Thermal Conductivity between 0.019 W/mK, a compressive strength of 100kPa and a Vapour Resistance that typically exceeds 41.6 MNs/gm.
View our Kingspan Kooltherm K110 Plus page for further details and prices on the product
Kingspan Kooltherm K118, a rigid Phenolic foam insulation board with a 12.5mm tapered edge gypsum based plasterboard on the front facing and a perforated low emissivity composite foil on the hidden face, is suitable for use in wall applications where it is mechanically fixed to timber frames or steel wall linings as well as adhesive bonded (dot and dab) to brick, block, or concrete walls.
Available in thicknesses from 32.5mm - 122.5mm.
Has a Thermal Conductivity between 0.019 W/mK, a compressive strength of 100kPa and a Vapour Resistance that typically exceeds 100 MNs/gm.
View our Kingspan Kooltherm K118 page for further details and prices on the product
Warmline EPS Laminate, a rigid EPS polystyrene insulation board with a 9.5mm tapered edge plasterboard on the front face, is suitable for the following applications: dot and dab or mechanically fixed dry lining direct to masonry and timber or steel frame walls and the underside of rafters or joists and window reveals.
Available in thicknesses from 22mm - 50mm.
View our Warmline EPS Laminate page for further details and prices on the product
Warmline PIR Laminate, a rigid PIR foam insulation board with a tapered edge plasterboard on the front face and craft paper or composite aluminium foil on the hidden face*, is suitable for the following applications: dot and dab or mechanically fixed dry lining direct to masonry and timber or steel frame walls and the underside of rafters or joists.
* 29.5mm - 62.5mm have craft paper while 72.5mm - 92.5mm have aluminium foil on the hidden face
Available in thicknesses from 29.5mm - 92.5mm.
View our Warmline PIR Laminate page for further details and prices on the product
Warmline XPS Laminate, a rigid XPS polystyrene insulation board with a 9.5mm tapered edge plasterboard on the front face, is suitable for the following applications: dot and dab or mechanically fixed dry lining direct to masonry and timber or steel frame walls and the underside of rafters or joists and window reveals.
Available in thicknesses from 27mm - 55mm.
View our Warmline XPS Laminate page for further details and prices on the product
Warmline PIR Ply Laminate, a rigid PIR foam insulation board with 6mm ply wood sheet on the front face and aluminium foil on the hidden face, is suitable for the following applications: flat roof decking waterproofed with mechanically fixed, bonded or torch-on membrane systems.
Available in thicknesses from 96mm - 136mm..
View our Warmline PIR Ply Laminate page for further details and prices on the product
