Kingspan Insulation

Phenolic Insulation

Kooltherm: K103, K5, K106, K107, K108, K110, K110 Plus, K112, K15, and K118.

Kingspan manufacture various Phenolic rigid insulation boards for numerous applications within the building envolope.

Their new Kooltherm (K103 - K118) ranges provide a lower Lambda Value (Thermal Conductivity) of 0.018 W/mK... The most thermally efficient commonly used insulation board.


Phenolic insulation products

Use the following dropdowns to filter the products:

Kingspan Kooltherm K103

Kingspan Kooltherm K103, a rigid Phenolic foam insulation board with glass tissue on both faces, is suitable for the following applications: beam and dense block floors, between floor joists, suspended timber ground floors, between and under floor joists, concrete ground based floors, floating ground floors, upgrading concrete slab floors, and garage conversions.

Available in thicknesses from 25mm - 140mm.

Has a Thermal Conductivity of 0.018 W/mK, a compressive strength of 120kPa and a Vapour Resistance that typically exceeds 370 MNs/gm.

View our Kingspan Kooltherm K103 page for further details and prices on the product

Buy Kingspan Kooltherm K103 rigid board insulation products
Kingspan Kooltherm K5

Kingspan Kooltherm K5, a rigid Phenolic foam insulation board with glass tissue on both faces, is suitable for the following applications: external wall applications with render systems.

Available in thicknesses from 20mm - 70mm.

Has a Thermal Conductivity ranging from 0.023 - 0.020 W/mK, a compressive strength of 120kPa and a Vapour Resistance that typically exceeds 300 MNs/gm.

View our Kingspan Kooltherm K15 page for further details and prices on the product

Buy Kingspan Kooltherm K5 rigid board insulation products
Kingspan Kooltherm K106

Kingspan Kooltherm K106, a rigid Phenolic foam insulation board with a water-tight, vapour-open polypropylene fleece on the outer facing and a low emissivity composite foil on the inner face, is suitable for use in cavity wall applications with a 10mm residual cavity to the outer leaf, for walls up to 25m.

Available in thickness 90mm.

Has a Thermal Conductivity of 0.018 W/mK and a compressive strength of 120kPa.

View our Kingspan Kooltherm K106 page for further details and prices on the product

Buy Kingspan Kooltherm K106 rigid board insulation products
Kingspan Kooltherm K107

Kingspan Kooltherm K107, a rigid Phenolic foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: above, between or below rafter level applications as well as dwarf walls and loft floors.

Available in thicknesses from 25mm - 140mm.

Has a Thermal Conductivity of 0.018 W/mK and a compressive strength of 100kPa.

View our Kingspan Kooltherm K107 page for further details and prices on the product

Buy Kingspan Kooltherm K107 rigid board insulation products
Kingspan Kooltherm K108

Kingspan Kooltherm K108, a rigid Phenolic foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: partial-fill cavity wall applications.

Available in thicknesses from 50mm - 100mm.

Has a Thermal Conductivity of 0.018 W/mK and a compressive strength of 120kPa.

View our Kingspan Kooltherm K108 page for further details and prices on the product

Buy Kingspan Kooltherm K108 rigid board insulation products
Kingspan Kooltherm K110

Kingspan Kooltherm K110, a rigid Phenolic foam insulation board with a low emissivity composite foil on the outer facing and a glass tissue on the inner face, is suitable for use in semi-exposed concrete floor decks in new and existing car parks, storage areas, loading bays and similar areas beneath habitable domestic buildings.

Available in thicknesses from 65mm - 120mm.

Has a Thermal Conductivity between 0.018 W/mK, a compressive strength of 100kPa and a Vapour Resistance that typically exceeds 41.6 MNs/gm.

View our Kingspan Kooltherm K110 page for further details and prices on the product

Buy Kingspan Kooltherm K110 rigid board insulation products
Kingspan Kooltherm K110 Plus

Kingspan Kooltherm K110 Plus, a rigid Phenolic foam insulation board with a 6mm A1 Euroclass building board on the outer facing and a glass tissue on the inner face, is suitable for use in semi-exposed concrete floor decks in new and existing car parks, storage areas, loading bays and similar areas beneath habitable domestic buildings.

Available in thicknesses from 71mm - 126mm.

Has a Thermal Conductivity between 0.018 W/mK, a compressive strength of 100kPa and a Vapour Resistance that typically exceeds 41.6 MNs/gm.

View our Kingspan Kooltherm K110 Plus page for further details and prices on the product

Buy Kingspan Kooltherm K110 Plus rigid board insulation products
Kingspan Kooltherm K112

Kingspan Kooltherm K112, a rigid Phenolic foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: timber and steel frame wall lining applications.

Available in thicknesses from 25mm - 140mm.

Has a Thermal Conductivity of 0.018 W/mK and a compressive strength of 100kPa.

View our Kingspan Kooltherm K112 page for further details and prices on the product

Buy Kingspan Kooltherm K112 rigid board insulation products
Kingspan Kooltherm K15

Kingspan Kooltherm K15, a rigid Phenolic foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: rainscreen facade systems.

Available in thicknesses from 25mm - 150mm.

Has a Thermal Conductivity ranging from 0.021 to 0.022 W/mK and a compressive strength of 100kPa.

View our Kingspan Kooltherm K15 page for further details and prices on the product

Buy Kingspan Kooltherm K15 rigid board insulation products
Kingspan Kooltherm K118

Kingspan Kooltherm K118, a rigid Phenolic foam insulation board with a 12.5mm tapered edge gypsum based plasterboard on the front facing and a perforated low emissivity composite foil on the hidden face, is suitable for use in wall applications where it is mechanically fixed to timber frames or steel wall linings as well as adhesive bonded (dot and dab) to brick, block, or concrete walls.

Available in thicknesses from 32.5mm - 122.5mm.

Has a Thermal Conductivity between 0.018 W/mK, a compressive strength of 100kPa and a Vapour Resistance that typically exceeds 100 MNs/gm.

View our Kingspan Kooltherm K118 page for further details and prices on the product

Buy Kingspan Kooltherm K118 rigid board insulation products