SolaTube Ø25cm Slate & Plain tile

Sun pipe system for slate & plain tile pitched roofs with a 25cm diameter tube.

Can be installed quickly and easily on a roof with slate or plain tiles, up to 0.8 cm thick.

Best suited for smaller spaces such as but not limited to: spare bedrooms, bathrooms, toilets, corridors and landings.

Each installed system illuminates up to 10 m².

The polycarbonate roof domes have a fire classification of Tp(a), as certified by the BBA.

Recommended maximum tube install length is 6m.

Product Information

General information about SolaTube Ø25cm Pitch Roof System

Product Application

SolaTube Ø25cm for installation on to pitch roofs

This SolaTube Ø25cm pitch roof slate & plain tile flashing kit is suitable for installation on to slate or plain tiled pitch roofs, where the thickness of the tile is no greater than 0.8 cm thick.

System Components

Dome and Assembly (included in the system base kit)

Polycarbonate Flex Dome, Inner Dome, LightTracker Flex, 2 x Raybenders Flex, Top and Bottom Tube assembly, Brush Seal, Natural Effect Lens and Insulation Lens.

Flashing (included in the system base kit)

Ø25cm Pitch Roof Slate & Plain tile flashing

Extension tubes

Extension tubes and adjustable tubes (0-30° and 0-90°) can be added to the system to extend the install distance from roof to ceiling providing ease and flexibility of installation.

Diffuser

Choice of diffusers: Round Classic Vusion, Round JustFrost, Square JustFrost and Square Recessed Ceiling Diffuser.
* When choosing a Square Diffuser, a transition box is included as part of the base kit.

Classic Vusion
Round SolaTube Ø25cm Classic Vusion Diffuser
JustFrost
Round SolaTube Ø25cm JustFrost Diffuser
JustFrost Square
Square SolaTube Ø25cm JustFrost Diffuser
Recessed
Square SolaTube Ø25cm Recessed Diffuser

Product Prices

Buy SolaTube Ø25cm Pitch roof kits

SolaTube Ø25cm Pitched Roof (Slate & Plain tile) round diffuser system base kit
Extension tubes (install distance from roof to ceiling)
0-30° adjustable tube
0-90° adjustable tube
Diffuser
Daylight Dimmer
Ventilation
Light Add-on kits
Solatube round diffuser system

SolaTube Ø25cm Pitched Roof (Slate & Plain tile) square diffuser system base kit
Extension tubes (install distance from roof to ceiling)
0-30° adjustable tube
0-90° adjustable tube
Diffuser
Daylight Dimmer
Ventilation
Light Add-on kits
Solatube square diffuser system

Product Performance and Guides

Product Performance, Manufacturer Downloads, and Installation Guides

Technical Specification

Below are the technical specifications for both the standard SolaTube Ø25cm system and the SolaTube Ø25cm Energy Care Optima (ECO) version. The SolaTube Ø25cm ECO pitch roof system can be purchased by Clicking Here

Ø25 cm Ø25 cm ECO
Light output in lumens3 1434 1127
Recommended maximum tube length1 max 6m max 6m
U-value complete set2 1.3 W/m²K 0.5 W/m²K
G-value2 61% 44%
LTA/value2 58% 46%
Sound Insulation2 Dn,e,w (C Ctr) 65 (- 1;-5) dB 67 dB
Upward pressure / downward pressure4 UL 3352/DL 7182 UL 3352/DL 7182
Gust Load SB 1350 SB 1350
  • 1 Solatube Lumen Output Tabels 4.1 - 7/05.
  • 2 Research Grontmij (Sweco), Peutz en ITC-CNR.
  • 2 Half-year average based on research by Grontmij (Sweco) en Lichtconsult.nl.
  • 2 Tested with the EN 1873 method by British Board of Agrément.

Product Downloads

Component Downloads

Product Certificates

SolaTube