Insulation rolls, made from recycled plastic, for ceiling level applications in the loft space and seperating floors.
Suitable for use in loft floor Applications. Can also be used in seperating floor applications.
Made of 100% recycled polyester from recycled plastic bottles.
Does not contain any harmful chemicals or binders.
Converting plastic bottles into insulation helps divert many tonnes of waste plastic from landfill or incineration plants, helping to protect our environment.
Can be safely handled without gloves or protective clothing
Thicknesses and Availability:
This SupaSoft roll range includes the following readily available product thicknesses: 50mm and 100mm.
General information about Thermafleece SupaSoft
General application insulating rolls
Thermafleece's SupaSoft, made from recycled plastic bottles, is suitable for use at loft floor level and seperating floors.
Thermafleece SupaSoft roll is manufactured from 100% recycled polyester, made from recycled bottles, compressed and cut into roll lengths.
|Thickness||50mm to 100mm|
|Roll Length||5m - 10m (dependant on thickness)|
|Roll Width||0.39m and 0.59m|
Buy Thermafleece SupaSoft
Reasonable stock levels are held with delivery lead times being around 4-5 working days. Larger orders may take a little longer.
Thermafleece reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times my vary.
- Generally 1 or 3 working days for delivery
- Generally 1 to 5 working days for delivery
- Generally 5 to 10 working days for delivery
- Special request or made to order item, allow extended lead times. Minimum order levels may apply.
- Please call to check availability and approximate lead times
Product Performance and Guides
Product Performance, Manufacturer Downloads, and Installation Guides
|Thermal Conductivity||0.040 W/m·K|
|Nominal Density||approx. 15 kg/m³|
|Water Absorption||0% w/w||@100% RH|
|Vapour Resistance||> 5 MNs/gm|
|SupaSoft 50mm||50mm||1.25 m²K/W||0.74 kg/m²|
|SupaSoft 100mm||100mm||2.50 m²K/W||1.48 kg/m²|
Standards & Approval
Thermafleece SupaSoft roll is manufactured in accordance with quality management system ISO 9001. All products must be installed in accordance with guidance issued by Thermafleece.
Where building regulation approval is required, you should take advice from your local building control authority and the building designer.
- GWP (A1-A3): 99 kgCO2e
- GWP (A1-A3) inc. biogenic carbon: 0.0 kgCO2e
- Recycled Content: > 95%
- Recyclable: Yes