

Thermofloc VSD Membrane
Airtight barrier and vapour control layer for use on walls and roof linings.
Suitable for installation on the warm side of the insulation in wall and roof lining applications.
Intelligent high performance airtight membrane with a variable surface diffusion that allows the membrane to act as an effective vapour control layer whilst enabling two way movement of vapour for effective moisture management.
Reinforced for increased tear resitance.
Easy to handle and install without gloves or protective clothing.
Installed with the printed side facing into the building or the fibrous side facing the inuslation/out of the building.
Availability:
Available for delivery direct from the manufacturer with an approx. lead time of 3-5 days.
Product Information
General information about Thermofloc VSD Membrane
Product Application
Airtight vapour control layer for walls and roof linings
Thermofloc VSD membrane is suitable for use in walls and roof linings as an intelligent vapour control layer.
Product Make-up
Core
Thermofloc VSD Membrane is a non-woven polypropylene membrane that adapts its vapour resistance with changes to heat and moisture levels (winter/cold = high vapour resitance, summer/heat = low vapour resistance).
Product Properties
Colour | Light Grey | |
Weight | 100 g/m² | |
Roll Length | 16.7m and 50m | |
Roll Width | 1.5m |
Product Prices
Buy Thermofloc VSD Membrane
Reasonable stock levels are held with delivery lead times being around 4-5 working days. Larger orders may take a little longer.
Thermafleece reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times my vary.
- Generally 1 or 3 working days for delivery
- Generally 1 to 5 working days for delivery
- Generally 5 to 10 working days for delivery
- Special request or made to order item, allow extended lead times. Minimum order levels may apply.
- Please call to check availability and approximate lead times
Product Performance and Guides
Product Performance, Manufacturer Downloads, and Installation Guides
Product Performance
Tensile strength | MD 350 / CD 315 | EN 12311-1 |
Tear resistance | MD 350 / CD 375 | EN12310-1 |
Resistance to water penetration | Class W1 | EN 1928 |
Product Downloads
Thermafleece Insulation
- 01768 486 285
- www.thermafleece.com
- enquiries@thermafleece.com