Unaffected by air infiltration. Resistant to the passage of water vapour.
Thicknesses and Availability:
Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.
This Kooltherm Range includes the following readily available product thickness: 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm, 100mm and 120mm.
The following thicknesses are manufactured to order: 90mm, 110mm, 130mm, 140mm and 150mm; these may carry minimum order levels.
Kingspan Kooltherm K107 is sent out from depots nationwide and is subject to the Local Depot Delivery minimum order levels and delivery charge thresholds.
Limited stock of the most popular boards sizes may be held at some of our larger depots, and thus, available on shorter lead times than the availability rating suggests.
Kingspan reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times may vary.
Generally 1 to 3 working days for delivery
Generally 1 to 5 working days for delivery
Generally 5 to 10 working days for delivery
Special request or made to order item, allow extended lead times. Minimum order levels may apply.
Please call to check availability and approximate lead times
Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me via our Contact Form or on 01903 899 898.
Product Application
Pitched roof insulating board
Kingspans premium performance lower-lambda value phenolic foam board, Kooltherm K107, is suitable for use in above, between or below rafter level applications as well as dwarf walls and loft floors.
Product Make-up
Core: Kingspan Kooltherm K107 Pitched Roof Board is a premium performance fibre-free rigid thermoset phenolic insulant.
Facings: Faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. This reflective, low emissivity surface improves the thermal resistance of any unventilated cavity adjacent to the board.
Product Properties
Thickness
25mm to 150mm
Length
2.4m
Width
1.2m
Edge
Square
Product Performance
Thermal Conductivity
0.019 W/mK
Compressive Strength
100 kPa at 10% compression
BS EN 826:2013
Nominal Density
35 kg/m³
Product Variants
Product
Thickness
Thermal Resistance
kg/m²
Kingspan Kooltherm K107 25mm
25mm
1.30 m²K/W
1.24 kg/m²
Kingspan Kooltherm K107 40mm
40mm
2.10 m²K/W
1.76 kg/m²
Kingspan Kooltherm K107 50mm
50mm
2.60 m²K/W
2.11 kg/m²
Kingspan Kooltherm K107 60mm
60mm
3.15 m²K/W
2.46 kg/m²
Kingspan Kooltherm K107 70mm
70mm
3.65 m²K/W
2.81 kg/m²
Kingspan Kooltherm K107 75mm
75mm
3.90 m²K/W
2.99 kg/m²
Kingspan Kooltherm K107 80mm
80mm
4.20 m²K/W
3.16 kg/m²
Kingspan Kooltherm K107 90mm
90mm
4.70 m²K/W
3.51 kg/m²
Kingspan Kooltherm K107 100mm
100mm
5.25 m²K/W
3.86 kg/m²
Kingspan Kooltherm K107 110mm
110mm
5.75 m²K/W
4.21 kg/m²
Kingspan Kooltherm K107 120mm
120mm
6.30 m²K/W
4.56 kg/m²
Kingspan Kooltherm K107 130mm
130mm
6.80 m²K/W
4.91 kg/m²
Kingspan Kooltherm K107 140mm
140mm
7.35 m²K/W
5.26 kg/m²
Kingspan Kooltherm K107 150mm
150mm
7.85 m²K/W
5.61 kg/m²
While we have provided Thermal Resistance values for all thicknesses on the Kingspan Kooltherm K107 datasheet, some thicknesses may not be readily available.
