Thermafleece UltraWool

Description

Description

British sheeps wool insulation for general applications within the building envelope

Suitable for use in a number of applications including roof, wall and floor systems.

Made in Britain from 75% British sheeps wool and 25% recycled polyester.

UltraWool is high density with better thermal values offer more efficient thermal and acoustic characteristics.

Higher thermal mass helps buffer heat to reduce summertime overheating.

Allows a healthy moisture balance helping protect building fabric and health.

Can be safely handled without gloves or protective clothing

Thicknesses and Availability:

This UltraWool range includes the following readily available product thicknesses: 50mm, 70mm and 90mm.

Categories: Eco-Friendly Slabs, Mineral Wool Slabs

Product options

Quantity	Product	ex-VAT	inc-VAT
Thermafleece UltraWool Slab 50mm, 30 x 0.39x1.2m = 14.04m² quantity	Thermafleece UltraWool Slab 50mm, 30 x 0.39x1.2m = 14.04m²	£144.29	£173.15
Thermafleece UltraWool Slab 50mm, 20 x 0.59x1.2m = 14.16m² quantity	Thermafleece UltraWool Slab 50mm, 20 x 0.59x1.2m = 14.16m²	£145.52	£174.62
Thermafleece UltraWool Slab 70mm, 21 x 0.39x1.2m = 9.83m² quantity	Thermafleece UltraWool Slab 70mm, 21 x 0.39x1.2m = 9.83m²	£141.54	£169.85
Thermafleece UltraWool Slab 70mm, 14 x 0.59x1.2m = 9.91m² quantity	Thermafleece UltraWool Slab 70mm, 14 x 0.59x1.2m = 9.91m²	£142.69	£171.23
Thermafleece UltraWool Slab 90mm, 18 x 0.39x1.2m = 8.42m² quantity	Thermafleece UltraWool Slab 90mm, 18 x 0.39x1.2m = 8.42m²	£155.66	£186.79
Thermafleece UltraWool Slab 90mm, 12 x 0.59x1.2m = 8.5m² quantity	Thermafleece UltraWool Slab 90mm, 12 x 0.59x1.2m = 8.5m²	£157.14	£188.57

Availability Indicators

Thermafleece UltraWool is sent direct to site from the manufacturer and is subject to the Thermafleece Insulation & Membranes shipping charge.

Reasonable stock levels are held with delivery lead times being around 4-5 working days. Larger orders can take a little longer ... up to 5-10 working days.

Thermafleece reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times my vary.

Generally 1 to 3 working days for delivery
Generally 1 to 5 working days for delivery
Generally 5 to 10 working days for delivery
Special request or made to order item, allow extended lead times. Minimum order levels may apply.
Please call to check availability and approximate lead times

Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me via our Contact Form or on 01903 899 898.

Product Application

General application insulating slab

Thermafleece natural sheeps wool slabs, UltraWool, is suitable for use in roofs, walls and floors throughout the building.

Product Make-up

Core: Thermafleece UltraWool slab is manufactured by combining British sheeps wool (75%) and recycled polyester and binders (25%) before being compressed and cut into dense slabs.

Product Properties

Thickness	50mm to 90mm
Slab Length	1.2m
Slab Width	0.39m and 0.59m

Product Performance

Thermal Conductivity	0.035 W/m·K
Nominal Density	approx. 31 kg/m³
Water Absorption	30% w/w	@100% RH
Mould Resistance	Pass	CUAP 2002-01-25
Moth/Beetle Proofing	Pass	ISO 3998
Vapour Resistance	> 9 MNs/gm

Product Variants

Product	Thickness	Thermal Resistance	kg/m²
UltraWool 50mm	50mm	1.43 m²K/W	1.54 kg/m²
UltraWool 70mm	70mm	2.00 m²K/W	2.14 kg/m²
UltraWool 90mm	90mm	2.57 m²K/W	2.79 kg/m²

Standards & Approval

Thermafleece UltraWool is manufactured in accordance with quality management system ISO 9001. All products must be installed in accordance with guidance issued by Thermafleece.

Where building regulation approval is required, you should take advice from your local building control authority and the building designer.